-
Nine Steps of Bearing Manufacture
13 Apr, 2019
Bearings are important parts of household electrical appliances, industrial equipment, automobile generators and fans. In this article, it will show the manufacture process of bearing. There are 9 steps in the manufacture of bearing. I. Manufacture of Bearing Ring After the bearing ring was lathed into a correct degree of thickness, the inner ring is put into the outer ring. They are ground to a c...
-
Do not have China phobia
01 Apr, 2019
The president of the German Foreign Trade Organization reminded the EU not to have "China phobia"! The German Association of Foreign Trade and Wholesalers warned about changes in German industrial policy and the "Chinese phobia" (also known as "China phobia") issue, according to Moral Media on April 1. "We must not expand Europe into a siege," said Bingman, president of the association in Berlin o...
-
Characteristics and Usage of Insert Bearing Units
25 Mar, 2019
Inset bearing units are composed of insert bearing with sealing on both sides and molten (or steel plate punched) bearing support. The internal structure of insert bearings is the same with that of deep groove ball bearings, but the inner ring of this bearing is wider than the outer ring, and the outer ring has the external surface of the spherical segment, which can achieve automatic self-a...
-
Characteristics and Usage of Thrust Tapered Roller Bearings
16 Mar, 2019
This type of bearings (Thrust Tapered Roller Bearings) is equipped with truncated cone roller (the large end is spherical surface), which is accurately led by lip of the raceway washer (shaft washer, housing washer). In the design, the verticals of all circular conical surfaces including raceway of shaft washer, raceway of housing washer and rolling surface of roller interact at one point on the c...
-
Characteristics and Usage of Thrust Roller Bearings
28 Feb, 2019
Thrust roller bearings are used for bearing axial and radial combined load that is dominated by axial load, but the radial load shall not exceed 55% of the axial load. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher rotational speed, with the ability of self-aligning. Type 29000 bearing is equipped with asymmetric spherical rollers, which can redu...
-
Characteristics of Thrust Ball Bearings
24 Jan, 2019
It is composed of washer-shaped raceway ring, balls and holder group. The raceway ring matched with shaft is called shaft washer and that matched with shell is called housing washer. Double-direction thrust bearings coordinate central washer shaft. Single-direction bearing can bear unidirectional axial load while double-direction bearings can bear bidirectional axial load (both of them cannot bear...
-
Characteristics and Usage of Deep Groove Ball Bearings
12 Jan, 2019
Structurally, each ring of deep groove ball bearing has a continuous groove raceway, the cross section of which is about one third of the equatorial circumference of the ball. Deep groove ball bearings are mainly used for bearing radial load, but can also bear some axial load. When the radial clearance of the bearing increases, it has the property of angular contact ball bearing and can bear the a...
-
King Pin Thrust Bearings
29 Dec, 2018
King Pin Thrust Bearings We produce and supply Kingpin bearings for most of four wheeler and other machines including Cars, Autos, Trucks, Treadmills, Tractors, Buses, Vans, SUV, Combine Harvesters, Cranes, Tippers, Earth Movers and so on. These bearings offer different size at SKET company. The bearings have good life time and remain rust free provided they remain lubricated well. In automotive&n...
-
Characteristics and Usage of Tapered Roller Bearings
28 Dec, 2018
Bearings play a significant role in mechanical equipment, in which their main function is to support mechanical rotator, thus reducing frictional coefficients of mechanical loads during the transmission process of the equipment. Tapered roller bearings are equipped with truncated cone roller, which is led by large lip of the inner ring. In the design, the verticals of all circular conical surfaces...