Item No. | English Name |
GB/T 272-1993 | Rolling bearing--Identification code |
GB/T 275-1993 | Shaft and housing fits for rolling bearings |
GB/T 7810-1995 | Rolling bearings--Insert bearing units--Boundary dimensions |
GB/T 14364-1993 | Marine intermediate shafting sliding bearing |
GB/T 1174-1992 | Cast bearing metals |
FZ/T 92013-2006 | SL series top roller bearings |
FZ/T 92024-2006 | LZ series botton roller bearings |
GB/T 10445-1989 | Plain bearings--Shaft diameters for unsplit bushes |
GB/T 10446-1989 | Plain bearings--Ring type thrust washers made from strip--Dimensions and tolerances |
GB/T 10447-1989 | Plain bearings--Pressed bimetallic half thrust washers--Features and tolerances |
GB/T 12613.1-2002 | Plain bearings--Wrapped bushes--Part 1:Dimensions |
GB/T 12613.2-2002 | Plain bearings--Wrapped bushes--Part 2:Test data for outside and inside diameter |
GB/T 12613.3-2002 | Plain bearings--Wrapped bushes--Part 3:Lubrication holes,lubrication grooves and lubricationindentations |
GB/T 12613.4-2002 | Plain bearings--Wrapped bushes--Part 4:Materials |
GB/T 12764-1991 | Rolling bearings--Needle rollerbearings,drawn cup,without inner ring--Boundary dimension plan |
GB/T 12765-1991 | Spherical plain bearings,joint type--Abutment andfillet dimensions |
GB/T 12948-1991 | Plain bearings--Metallic multilayer plain bearings--Destructive testing of bond for bearing metals |
GB/T 12949-1991 | Plain bearings--Bimetallic busheswith plastic overlay |
GB/T 13345-1992 | General technical requirement of oil film bearing for rolling mill |
GB/T 14036-1993 | Hydraulic fluid power--Cylinders--Rod end spherical eyes--Mounting dimensions |
GB/T 14910-1994 | Plain bearings--Requirements on backings for thick-walled multilayer bearings |
GB/T 16643-1996 | Rolling bearings--Combined needle roller thrust roller bearings--Boundary dimensions |
GB/T 16748-1997 | Plain bearings--Compression testing of metallic bearing materials |
GB/T 16925-1997 | Test method for abrasion resistance of concrete and its products(Ball bearing method) |
GB/T 16940-1997 | Linear motion bearings--Linear motion ball bearings--Boundary dimensions and tolerances |
GB/T 18254-2002 | High-carbon chromium bearing steel |
GB/T 18323-2001 | Plain bearings--Sintered bushes--Dimensions and tolerances |
GB/T 18324-2001 | Plain bearings--Copper alloy bushes |
GB/T 18325.1-2001 | Plainbearings--Bearing fatigue--Plain bearings in test rigs and in application underconditions of hydrodynamic lubrication |
GB/T 18326-2001 | Plain bearings--Multilayer materials for thin-walled plain bearings |
GB/T 18327.1-2001 | Plain bearings--Basic symbols |
GB/T 18327.2-2001 | Plain bearings--Applications |
GB/T 18329.1-2001 | Plain bearings--Non-destructive ultrasonic testing of hond for metallic multilayer plain bearings |
GB/T 18330-2001 | Plain bearings--Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes |
GB/T 18331.1-2001 | Plain bearings--Checking the outside diameter for wrapped bushes |
GB/T 18579-2001 | High-carbon chromium bearing steel wires |
GB/T 18844-2002 | Plain bearings--Terms,characteristics and causes of damage and changes in appearance |
GB/T 19673-2005 | Linear motion rolling bearings-Rolling bearings,linear motion ball,recirculating,sleeve type-Accessories |
GB/T 20056-2006 | Rollingbearings - Radialneedlerollerandcageassemblies - Dimensions and tolerances |
GB/T 20057-2006 | Rolling bearings ― Single-row cylindrical roller bearings ― Chamfer dimensions for loose rib and non-rib sides |
GB/T 20058-2006 | Rolling bearings ― Single-row angular contact ball bearings ― Chamfer dimensions for outer ring non-thrust side |
GB/T 20059-2006 | Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings |
GB/T 20060-2006 | Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions |
GB/T 2688-1981 | Powder metallurgy plain bearing--Technical requirements |
GB/T 271-1997 | Rolling bearings--Classification |
GB/T 273.1-2003 | Rolling bearings--Tapered roller bearing--Plan of boundary dimensions |
GB/T 273.2-2006 | Rolling bearings - Thrust bearings - Boundary dimensions, general plan |
GB/T 273.3-1999 | Rolling bearings--Radial bearings--Boundary dimensions,general plan |
GB/T 274-2000 | Rolling bearings--Chamfer dimension--Maximumvalues |
GB/T 276-1994 | Rolling bearings--Deep groove ball bearings--Boundary dimensions |
GB/T 281-1994 | Rolling bearings--Self-aligning ball bearings--Boundary dimensions |
GB/T 285-1994 | Rolling bearings--Double row cylindrical roller bearings--Boundary dimensions |
GB/T 288-1994 | Rolling bearings--Self-aligning roller bearings--Boundary dimensions |
GB/T 2889-1994 | Plain bearings--Terms,definitions and classification |
GB/T 290-1998 | Rolling bearings--Needle roller bearings,drawn cup without inner rings--Boundary dimensions |
GB/T 294-1994 | Rolling bearings--Three pointand four point contact ball bearings--Boundary dimensions |
GB/T 296-1994 | Rolling bearings--Double row angular contact ball bearings--Boundary dimensions |
GB/T 297-1994 | Rolling bearings--Tapered roller bearings--Boundary dimensions |
GB/T 299-1995 | Rolling bearings--Metric double row tapered roller bearings--Boundary dimensions |
GB/T 300-1995 | Rolling bearings--Four row tapered roller bearings--Boundary dimensions |
GB/T 301-1995 | Rolling bearings--Thrust ball bearings--Boundary dimensions |
GB/T 304.1-2002 | Spherical plain bearings--Classification |
GB/T 304.2-2002 | Spherical plain bearings--Identification code |
GB/T 304.3-2002 | Spherical plain bearings--Fits |
GB/T 304.9-1981 | Spherical plain radial bearings,joint type--Technical requirements |
GB/T 305-1998 | Rolling bearings--Snap ring groove and snap ring on outer ring--Dimensions and tolerances |
GB/T 307.1-2005 | Rolling bearings-Radial bearings-Tolerances |
GB/T 307.2-2005 | Rolling bearings-Measuring and gauging principles and methods |
GB/T 307.3-2005 | Rolling bearings-General technical regulations |
GB/T 307.4-2002 | Rolling bearings--Thrust bearings--Tolerances |
GB/T 308-2002 | Rolling bearings--Steel balls |
GB/T 3086-1982 | Specification for high carbon chromium stainless bearing steels |
GB/T 309-2000 | Rolling bearings--Needle rollers |
GB/T 3162-1991 | Plain bearings--Thin-walled bearing shells--Dimensions,structure elements and tolerances |
GB/T 3203-1982 | Specification for carburizing steels of bearings |
GB/T 3882-1995 | Rolling bearings--Insert bearings and eccentric looking collars--Boundary dimensions |
GB/T 3944-2002 | Spherical plain bearings--Vocabulary |
GB/T 4199-2003 | Rolling bearings--Tolerances--Definitions |
GB/T 4459.7-1998 | Mechanical drawings--Representation of rolling bearings |
GB/T 4604-2006 | Rolling bearings - Radial internal clearance |
GB/T 4605-2003 | Rolling bearings--Thrust needle roller and cage assemblies,thrust washers |
GB/T 4648-1996 | Rolling bearings--Metric tapered roller bearings--Flanged cups--Boundary dimensions |
GB/T 4661-2002 | Rolling bearings--Cylindrical rollers |
GB/T 4662-2003 | Rolling bearings--Static load ratings |
GB/T 4663-1994 | Rolling bearings--Cylindrical thrust roller bearings--Boundary dimensions |
GB/T 5800-2003 | Rolling bearings--Instrument precision bearings |
GB/T 5801-2006 | Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances |
GB/T 5859-1994 | Rolling bearings--Self-aligning thrust roller bearings--Boundary dimensions |
GB/T 5868-2003 | Rolling bearings--Mounting dimensions |
GB/T 6391-2003 | Rolling bearings--Dynamic load ratings and rating life |
GB/T 6445-2007 | () |
GB/T 6930-2002 | Rolling bearings--Vocabulary |
GB/T 7217-2002 | Rolling bearings--Radial ball bearings with flanged outer ring--Flange dimensions |
GB/T 7218-1995 | Rolling bearings--Miniature radial ball bearings with flanged outer ring--Boundary dimensions |
GB/T 7308-1987 | Plain bearings--Thin-walled flanged half bearings--Dimensions, tolerances and methods of checking |
GB/T 7631.4-1989 | Lubricants and related products (class L)--Classification--Part 4:Family F (Spindlebearings,bearings and associated clutches) |
GB/T 7809-1995 | Roliing bearings--Housings for insertbearing--Boundary dimensions |
GB/T 7811-2007 | () |
GB/T 7813-1998 | Rolling bearings accessories--Plummer block housings--Boundary dimensions |
GB/T 7948-1987 | Test method for PV limit of plastics bearings |
GB/T 8597-2003 | Rolling bearings--Rust proof packaging |
GB/T 8740-2005 | Casting bearing alloy ingots |
GB/T 9160.1-2006 | Rolling bearings―Accessories―Part 1: Tapered sleeves |
GB/T 9160.2-2006 | Rolling bearings-Accessories-Part 2:Locknuts and locking devices |
GB/T 9161-2001 | Spherical plain bearings--Spherical plain bearings rod ends |
GB/T 9162-2001 | Spherical plain bearings--Thrust spherical plain bearings |
GB/T 9163-2001 | Spherical plain bearings--Radial spherical plain bearings |
GB/T 9164-2001 | Spherical plain bearings--Angular contact radial spherical plain bearings |
HG/T 3980-2007 | Sealing rings of automobile bearing |
JB/T 10650-2006 | Split rolling bearing with housing for metallurgical equipment |
JB/T 10781-2007 | 4 Sruds rolling bearings block housings-Types and dimensions |
JB/T 4071.1-2007 | Grinding machines for bearing ring-Part 1: Outer surface grinding machines-Testing of the accuracy |
JB/T 4071.2-2007 | Grinding machines for bearing ring-Part 2: Inner surface grinding machines-Testing of the accuracy |
JB/T 4334-2006 | Technical conditions for static gas bearing turbo expanders |
JB/T 5314-2002 | Rolling bearings-Measuring methods for vibration(acceleration) |
JB/T 7293-2007 | Internal combustion engines -Main bearing lid bolts and nuts-Specification |
JB/T 9049-2007 | Oil film bearing for rolling roll |
JB/T 9921.2-2007 | Superfinishing machine for groove of bearing inner rings and superfinishing machine for groove of bearing outer rings-Part 2:Specifications |
YB/T 5144-2006 | Carbon structural steel wires for bearing cages |
JB/T 1255-2001 | Specification for heat–treatment of rolling bearing parts made from high carbon chromium steel |
Source SKET BEARING
SKET® is a leading manufacturer of bearings and bearing parts in China.
Based on industrial cluster advantage, SKET can produce and supply bearings with high quality at low cost.
The products we can produce:
Tapered Roller Bearings, Spherical Roller Bearings, and Deep Groove Ball Bearings etc.
The products we can supply:
Agricultural Bearings, Pillow Block and Insert Bearings etc.
Application Fields of SKET Bearings:
Automotive OEM and aftermarket, construction machinery, mining machinery, metallurgical equipment, coal mill, ball grinding mill, excavator, cement plant and steel mill etc.
If you have a question and need a bearing quote just Email us at Sales@sketbearings.com