ISO 1002-1983 | Rolling bearings; Airframe bearings; Characteristics, boundary dimensions, tolerances, static load ratings |
ISO 10129-2006 | Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions |
ISO 10285-1992 | Rolling bearings, linear motion, recirculating ball, sleeve type; metric series |
ISO 10317-1992 | Rolling bearings; metric tapered roller bearings; designation system |
ISO 104-2002 | Rolling bearings - Thrust bearings - Boundary dimensions, general plan |
ISO 10792-1-1995 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series |
ISO 10792-2-1995 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series |
ISO 10792-3-1995 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification |
ISO 113-1999 | Rolling bearings - Plummer block housings - Boundary dimensions |
ISO 1132-1-2000 | Rolling bearings - Tolerances - Part 1: Terms and definitions |
ISO 1132-2-2001 | Rolling bearings - Tolerances - Part 2: Measuring and gauging principles and methods |
ISO 11687-1-1995 | Plain bearings - Pedestal plain bearings - Part 1: Pillow blocks |
ISO 11687-2-1995 | Plain bearings - Pedestal plain bearings - Part 2: Side flange bearings |
ISO 11687-3-1995 | Plain bearings - Pedestal plain bearings - Part 3: Centre flange bearings |
ISO 12043-1995 | Roller bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides |
ISO 12044-1995 | Roller bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side |
ISO 1206-2001 | Rolling bearings - Needle roller bearings, dimension series 48, 49 und 69 - Boundary dimensions and tolerances |
ISO 12128-2001 | Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes |
ISO 12129-1-1995 | Plain bearings - Part 1: Fits |
ISO 12129-2-1995 | Plain bearings - Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars |
ISO 12130-1-2001 | Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings |
ISO 12130-2-2001 | Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings |
ISO 12130-3-2001 | Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings |
ISO 12131-1-2001 | Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 1: Calculation of thrust pad bearings |
ISO 12131-2-2001 | Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 2: Functions for the calculation of thrust pad bearings |
ISO 12131-3-2001 | Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 3: Guide values for the calculation of thrust pad bearings |
ISO 12132-1999 | Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA |
ISO 12167-1-2001 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves |
ISO 12167-2-2001 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves |
ISO 12168-1-2001 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves |
ISO 12168-2-2001 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves |
ISO 1224-1984 | Rolling bearings; Instrument precision bearings |
ISO 12240-1-1998 | Spherical plain bearings - Part 1: Radial spherical plain bearings |
ISO 12240-2-1998 | Spherical plain bearings - Part 2: Angular contact radial spherical plain bearings |
ISO 12240-3-1998 | Spherical plain bearings - Part 3: Thrust spherical plain bearings |
ISO 12240-4 Technical Corrigendum 1-1999 | Spherical plain bearings - Part 4: Spherical plain bearing rod ends; Technical Corrigendum 1 |
ISO 12240-4-1998 | Spherical plain bearings - Part 4: Spherical plain bearing rod ends |
ISO 12301 Technical Corrigendum 1-1995 | Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics; Technical Corrigendum 1 |
ISO 12301-1992 | Plain bearings; quality control techniques and inspection of geometrical and material quality characteristics |
ISO 12302-1993 | Plain bearings; quality characteristics; statistical process control (SPC) |
ISO 12303-1995 | Plain bearings - Quality characteristics - Calculation of machine and process capabilities |
ISO 12306-1994 | Plain bearings; measurement of wall thickness of thin-walled half-bearings and thin-walled bushes |
ISO 12307-1-1994 | Plain bearings - Wrapped bushes - Part 1: Checking the outside diameter |
ISO 12307-2-2000 | Plain bearings - Checking of wrapped bushes - Part 2: Checking the inside diameter |
ISO 12308-1994 | Plain bearings; quality assurance; sample types; definitions, applications and testing |
ISO 13012 Technical Corrigendum 1-1999 | Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories; Technical corrigendum 1 |
ISO 13012-1998 | Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories |
ISO 13411-1997 | Aerospace - Airframe needle roller, cylindrical roller and track roller bearings - Technical specification |
ISO 13414-1997 | Aerospace - Airframe needle roller bearings, single-row, shielded - Inch series |
ISO 13778-1999 | Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range |
ISO 13846-2000 | Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaklightness under internal water pressure |
ISO 14190-1998 | Aerospace - Airframe rolling bearings: Ball and spherical roller bearings - Technical specification |
ISO 14191-1998 | Aerospace - Airframe spherical roller bearings, single-row, self-aligning, diameter series 3 and 4 - Metric series |
ISO 14192-1998 | Aerospace - Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty - Metric series |
ISO 14193-1998 | Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, extended inner ring, intermediate duty - Inch series |
ISO 14194-1998 | Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, extended inner ring, heavy duty - Inch series |
ISO 14195-1998 | Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, torque tube design, light duty - Inch series |
ISO 14196-1998 | Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, plain inner ring, heavy duty - Inch series |
ISO 14197-1998 | Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, intermediate duty - Inch series |
ISO 14201-1998 | Aerospace - Airframe ball bearings, double-row, self-aligning, diameter series 2 - Metric series |
ISO 14202-1998 | Aerospace - Airframe ball bearings, single-row, rigid, diameter series 0 and 2 - Metric series |
ISO 14203-1998 | Aerospace - Airframe ball bearings, single-row, rigid, diameter series 8 and 9 - Metric series |
ISO 14204-1998 | Aerospace - Airframe ball bearings, double-row, rigid, diameter series 0 - Metric series |
ISO 14206-1998 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, light duty - Inch series |
ISO 14207-1998 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, light duty - Inch series |
ISO 14208-1998 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, intermediate duty - Inch series |
ISO 14209-1998 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty - Inch series |
ISO 14210-1998 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty - Inch series |
ISO 14211-1998 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty - Inch series |
ISO 14212-1998 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty - Inch series |
ISO 14213-1998 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra light duty - Inch series |
ISO 14214-1998 | Aerospace - Airframe ball bearings, double-row, rigid, sealed, heavy duty - Inch series |
ISO 14215-1998 | Aerospace - Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty - Inch series |
ISO 14216-1998 | Aerospace - Airframe ball bearings, double-row, self-aligning, sealed, heavy duty - Inch series |
ISO 14217-1998 | Aerospace - Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty - Inch series |
ISO 14218-1998 | Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, heavy duty - Inch series |
ISO 14219-1998 | Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty - Inch series |
ISO 14220-1998 | Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, light duty - Inch series |
ISO 14221-1998 | Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty - Inch series |
ISO 14728-1-2004 | Rolling bearings - Linear motion rolling bearings - Part 1: Dynamic load ratings and rating life |
ISO 14728-2-2004 | Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings |
ISO 14839-1-2002 | Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearing - Part 1: Vocabulary |
ISO 14839-2-2004 | Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 2: Evaluation of vibration |
ISO 15-1998 | Rolling bearings - Radial bearings - Boundary dimensions, general plan |
ISO 15241-2001 | Rolling bearings - Symbols for quantities |
ISO 15242-1-2004 | Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals |
ISO 15242-2-2004 | Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface |
ISO 15243-2004 | Rolling bearings - Damage and failures - Terms, characteristics and causes |
ISO 15312-2003 | Rolling bearings - Thermal speed rating - Calculation and coefficients |
ISO 16287-2005 | Plain bearings - Thermoplastic bushes - Dimensions and tolerances |
ISO 199-2005 | Rolling bearings - Thrust bearings - Tolerances |
ISO 21107-2004 | Rolling bearings and spherical plain bearings - Search structure for electronic media - Characteristics and performance criteria identified by attribute vocabulary |
ISO 246-1995 | Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions |
ISO 2795-1991 | Plain bearings; sintered bushes; dimensions and tolerances |
ISO 281 AMD 1-2000 | Rolling bearings - Dynamic load ratings and rating life; Amendment 1 |
ISO 281 AMD 2-2000 | Rolling bearings - Dynamic load ratings and rating life; Amendment 2: Life modification factor a<(Index)xyz> |
ISO 281-1990 | Rolling bearings; dynamic load ratings and rating life |
ISO 2982-1-1995 | Rolling bearings - Accessories - Part 1: Tapered sleeves - Dimensions |
ISO 2982-2-2001 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices; Dimensions |
ISO 3030-1996 | Roller bearings - Radial needle roller and cage assemblies - Dimensions and tolerances |
ISO 3031-2000 | Rolling bearings - Thrust needle roller and cage assemblies, thrust washers - Boundary dimensions and tolerances |
ISO 3096 Technical Corrigendum 1-1999 | Rolling bearings - Needle rollers - Dimensions and tolerances; Technical Corrigendum 1 |
ISO 3096-1996 | Rolling bearings - Needle rollers - Dimensions and tolerances |
ISO 3228-1993 | Rolling bearings; cast and pressed housings for insert bearings |
ISO 3245-1997 | Rolling bearings - Needle roller bearings, drawn cup without inner rings - Boundary dimensions and tolerances |
ISO 3290-2001 | Rolling bearings - Balls - Dimensions and tolerances |
ISO 3547-1-1999 | Plain bearings - Wrapped bushes - Part 1: Dimensions |
ISO 3547-2-1999 | Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameter |
ISO 3547-3-1999 | Plain bearings - Wrapped bushes - Part 3: Lubrication holes, lubrication grooves and lubrication indentations |
ISO 3547-4-1999 | Plain bearings - Wrapped bushes - Part 4: Materials |
ISO 3548-1999 | Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test |
ISO 355 ADD 1-1980 | Rolling bearings; metric tapered roller bearings; boundary dimensions and series designations; addendum 1 |
ISO 355 ADD 2-1980 | Rolling bearings; metric tapered roller bearings; boundary dimensions and series designations; addendum 2 |
ISO 355-1977 | Rolling bearings; Metric tapered roller bearings; Boundary dimensions and series designations |
ISO 4378-1-1997 | Plain bearings - Terms, definitions and classification - Part 1: Design, bearing materials and their properties |
ISO 4378-2-1983 | Plain bearings; Terms, definitions and classification; Part 2 : Friction and wear Trilingual edition |
ISO 4378-3-1983 | Plain bearings; Terms, definitions and classification; Part 3 : Lubrication Trilingual edition |
ISO 4378-4-1997 | Plain bearings - Terms, definitions and classification - Part 4: Calculation parameters and their symbol |
ISO 4379-1993 | Plain bearings; copper alloy bushes |
ISO 4381-2000 | Plain bearings - Lead and tin casting alloys for multilayer plain bearings |
ISO 4382-1-1991 | Plain bearings; copper alloys; part 1: cast copper alloys for solid and multilayer thick-walled plain bearings |
ISO 4382-2-1991 | Plain bearings; copper alloys; part 2: wrought copper alloys for solid plain bearings |
ISO 4383-2000 | Plain bearings - Multilayer materials for thin-walled plain bearings |
ISO 4384-1-2000 | Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials |
ISO 4384-2-1982 | Plain bearings; Hardness testing of bearing metals; Part 2 : Solid materials |
ISO 4385-1981 | Plain bearings; Compression testing of metallic bearing materials |
ISO 4386-1-1992 | Plain bearings; metallic multilayer plain bearings; part 1: non-destructive ultrasonic testing of bond |
ISO 4386-2-1982 | Plain bearings; Metallic multilayer plain bearings; Part 2 : destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm |
ISO 4386-3-1992 | Plain bearings; metallic multilayer plain bearings; part 3: non-destructive penetrant testing |
ISO 464-1995 | Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances |
ISO 492-2002 | Rolling bearings - Radial bearings - Tolerances |
ISO 5593-1997 | Rolling bearings - Vocabulary |
ISO 5753-1991 | Rolling bearings; radial internal clearance |
ISO 582-1995 | Rolling bearings - Chamfer dimensions - Maximum values |
ISO 5949-1983 | Tool steels and bearing steels; Micrographic method for assessing the distribution of carbides using reference photomicrographs |
ISO 6279-2006 | Plain bearings - Aluminium alloys for solid bearings |
ISO 6280-1981 | Plain bearings; Requirements on backings for thick-walled multilayer bearings |
ISO 6282-1983 | Plain bearings; metallic thin-walled half bearings; determination of the sigma 0,01<(hoch)*>-limit |
ISO 6524-1992 | Plain bearings; thin-walled half-bearings; checking of peripheral length |
ISO 6525-1983 | Plain bearings; Ring type thrust washers made from strip; Dimensions and tolerances |
ISO 6526-1983 | Plain bearings; Pressed bimetallic half thrust washers; Features and tolerances |
ISO 6691-2000 | Thermoplastic polymers for plain bearings - Classification and designation |
ISO 6743-2-1981 | Lubricants, industrial oils and related products (class L); Classification; Part 2 : Family F (Spindle bearings, bearings and associated clutches) |
ISO 6811 Technical Corrigendum 1-1999 | Spherical plain bearings - Vocabulary; Technical corrigendum 1 |
ISO 6811-1998 | Spherical plain bearings - Vocabulary |
ISO 683-17-1999 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels |
ISO 7063-2003 | Rolling bearings - Needle roller bearing track rollers - Boundary dimensions and tolerances |
ISO 7146-1993 | Plain bearings; terms, characteristics and causes of damage and changes in appearance |
ISO 7148-1-1999 | Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals |
ISO 7148-2-1999 | Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based bearing materials |
ISO 76-2006 | Rolling bearings - Static load ratings |
ISO 7902-1-1998 | Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 1: Calculation procedure |
ISO 7902-2-1998 | Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure |
ISO 7902-3-1998 | Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters |
ISO 7904-1-1995 | Plain bearings - Symbols - Part 1: Basic symbols |
ISO 7904-2-1995 | Plain bearings - Symbols - Part 2: Applications |
ISO 7905-1-1995 | Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication |
ISO 7905-2-1995 | Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material |
ISO 7905-3-1995 | Plain bearings - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material |
ISO 7905-4-1995 | Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material |
ISO 7938-1986 | Aircraft; Ball bearings for control cable pulleys; Dimensions and loads |
ISO 7939-1988 | Aircraft; non-metallic pulleys with ball bearings for control cables; dimensions and loads |
ISO 8443-1999 | Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions |
ISO 8826-1-1989 | Technical drawings; rolling bearings; part 1: general simplified representation |
ISO 8826-2-1994 | Technical drawings - Rolling bearings - Part 2: Detailed simplified representation |
ISO 9628-2006 | Rolling bearings - Insert bearings and eccentric locking collars - Boundary dimensions and tolerances |
ISO 9758-2000 | Aerospace - Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads |
ISO 9760-2000 | Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads |
ISO/TR 6281-1990 | Plain bearings; testing under conditions of hydrodynamic and mixed lubrication in test rigs; guidelines |
ISO/TS 16799-1999 |
Rolling
bearings - Dynamic load ratings and rating life - Discontinuities in the
calculating of basic dynamic load ratings |
Source SKET BEARING
About SKET (China)
SKET® is a leading manufacturer of bearings and bearing parts in China.
Based on industrial cluster advantage, SKET can produce and supply bearings with high quality at low cost.
The products we can produce:
Tapered Roller Bearings, Spherical Roller Bearings, and Deep Groove Ball Bearings etc.
The products we can supply:
Agricultural Bearings, Pillow Block and Insert Bearings etc.
Application Fields of SKET Bearings:
Automotive OEM and aftermarket, construction machinery, mining machinery, metallurgical equipment, coal mill, ball grinding mill, excavator, cement plant and steel mill etc.
If you have a question and need a bearing quote just Email us at
Sales@sketbearings.com