-
Characteristics and Usage of Thrust Roller Bearings
28 Feb, 2019
Thrust roller bearings are used for bearing axial and radial combined load that is dominated by axial load, but the radial load shall not exceed 55% of the axial load. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher rotational speed, with the ability of self-aligning. Type 29000 bearing is equipped with asymmetric spherical rollers, which can redu...
-
Characteristics of Thrust Ball Bearings
24 Jan, 2019
It is composed of washer-shaped raceway ring, balls and holder group. The raceway ring matched with shaft is called shaft washer and that matched with shell is called housing washer. Double-direction thrust bearings coordinate central washer shaft. Single-direction bearing can bear unidirectional axial load while double-direction bearings can bear bidirectional axial load (both of them cannot bear...
-
Characteristics and Usage of Deep Groove Ball Bearings
12 Jan, 2019
Structurally, each ring of deep groove ball bearing has a continuous groove raceway, the cross section of which is about one third of the equatorial circumference of the ball. Deep groove ball bearings are mainly used for bearing radial load, but can also bear some axial load. When the radial clearance of the bearing increases, it has the property of angular contact ball bearing and can bear the a...
-
King Pin Thrust Bearings
29 Dec, 2018
King Pin Thrust Bearings We produce and supply Kingpin bearings for most of four wheeler and other machines including Cars, Autos, Trucks, Treadmills, Tractors, Buses, Vans, SUV, Combine Harvesters, Cranes, Tippers, Earth Movers and so on. These bearings offer different size at SKET company. The bearings have good life time and remain rust free provided they remain lubricated well. In automotive&n...
-
Characteristics and Usage of Tapered Roller Bearings
28 Dec, 2018
Bearings play a significant role in mechanical equipment, in which their main function is to support mechanical rotator, thus reducing frictional coefficients of mechanical loads during the transmission process of the equipment. Tapered roller bearings are equipped with truncated cone roller, which is led by large lip of the inner ring. In the design, the verticals of all circular conical surfaces...